The 5822 Taylor Classic Digital Memory Timer is a medium-small digital timer with a big, bold display. The 5822 counts up to or down from 99 minutes 59 seconds for use in kitchen, lab, laundry, darkroom, or wherever. This timer also has a memory feature that, in countdown mode, recalls and displays the last set time when time expires and you press a button to stop the beeping. The minutes and seconds digits in the 5822's display are almost 0.7 inch tall for easy reading.

On the back of the 5822 timer is a 2-way holder. When the holder is used as a spring clip, you can attach the timer to a shirt pocket, waistband, or apron. You can also flip out a metal bar to extend the clip, which lets you stand the timer at an angle on a flat surface. On the back of the 5822 are also two magnets that can hold the timer to an iron or steel surface, such as a range hood or refrigerator door. To use the magnets for mounting, you first remove the spring clip by sliding it downward, out of the timer case. But don't force it. Please read the note below instead.

Important Note: The instructions for removing the spring clip don't tell you this, but there is a small sliding lock on the right side of the clip to hold it securely in place. You must carefully slide this lock toward the center of the spring clip to unlock the clip before you can remove it. Since there isn't much room for a finger even with the clip held extended by the metal bar, you may want to use a small, blunt instrument to gently slide the lock open and closed.

Here's something else you might want to know: You may see this timer advertised as having an 0.8-inch LCD readout. This is the height of the LCD panel itself, not the digits in it. As mentioned above, the digits are actually just under 0.7 inch tall (which is still big).

The simple styling and neutral colors of the Taylor 5822 timer will fit in with almost any kitchen decor. The timer runs on one AAA (1.5V) battery, which is included. All you need to do to power up the 5822 is remove the battery compartment cover, insert the battery (observing correct polarity), and then replace the cover. The 5822 is covered by a Taylor 1-year limited warranty.

Features:

• Quite compact in size but large display with big, bold 11/16-inch (17.5 mm) digits.
• Counts up to or down from 99 minutes 59 seconds.
• In countdown mode, memory feature resets timer to last set time when time expires and you press START/STOP.
• Three-way mounting: combination spring clip and stand, or dual magnets.
• Battery is included.

Specifications:

• Maximum countdown and count-up time: 99 minutes 59 seconds
• Resolution: 1 second
• Power requirements: one AAA (1.5V) battery. We recommend an alkaline battery when replacement becomes necessary.
• Dimensions:
  3-5/16 inches (95.3 mm) wide
  2-3/8 inches (41.3 mm) high
  1 inch (25.4 mm) deep with spring clip attached but not extended
  11/16 inch (17.5 mm) deep with spring clip removed (to use magnets for mounting)