The 2750 Taylor Digital Wireless Rain Gauge with Clock simultaneously displays daily rainfall plus weekly, monthly, or total rainfall. It also displays time, month, date, and weekday. Rainfall data is transmitted to the 2750R main unit by the included 2750 rainfall sensor/transmitter. The 2750 is part of Taylor's latest line of weather products, all of which feature a slim, contoured profile and larger displays than the products they replace. The 2750R main unit can be wall-mounted or placed on a shelf, table, or desk. The 2750 rainfall remote must be placed on, and can be secured to, a horizontal surface.

The 2750's daily rainfall measuring range is 0 to 39.33 inches (0 to 999 millimeters), and the weekly, monthly, and total rainfall measuring ranges are all 0 to 393.66 inches (0 to 9999 millimeters). Here are a few more things you need to know about the self-emptying 2750 rainfall remote. When installing batteries for the first time, don't forget to also remove the tape from over the rain cup before using the remote. The included stainless steel net will keep debris (leaves, stones, etc.) out of the rain collector. Be sure to remove and clean the net as needed. Also, be sure to bring the 2750 indoors when it's snowy and/or the temperature drops below freezing.

The digital quartz calendar clock in the 2750R main unit displays the time in your choice of 12-hour format with PM, or 24-hour format. The month and date are shown digitally in that order, and the weekday is shown as a two-letter abbreviation in English. The year is displayed only during setup.

The 2750R main unit and the 2750 remote are each powered by two AA (1.5V) alkaline batteries. These are not included and must be obtained separately. Expected battery life is 1 year. A dim or irregular display or no display indicates that battery replacement is needed.

On the back of both the 2750R main unit are a keyhole slot for wall mounting and an integral folding table stand. The 2750 rainfall remote can rest on a horizontal surface or be secured to the surface with four screws. Five mounting anchors and screws (enough for both units) are included.

If you're looking for an easy-to-read wireless digital rain gauge to measure rainfall or sprinkler amounts, the handsome and value-priced Taylor 2750 is a fine choice. Not only does it display rainfall in inches or millimeters, it also has a highly accurate digital quartz calendar clock with a large time display. The 2750 is perfect for almost any room in the house and comes with a 1-year factory warranty.

Features:

• Large two-line LCD panel displays the following information:
  • Daily rainfall and weekly, monthly, or total rainfall in first line
  • Time, month, date, and weekday in second line.
• Rainfall unit is pushbutton-selectable for inches or millimeters.
• Rainfall remote sensor is self-emptying.
• Handsome new styling and color.
• Main unit can be wall mounted, or its integral table stand can be extended for placement on a horizontal surface.
• Rainfall remote rests on, and can be secured to, a horizontal surface.
• Mounting anchors and screws are included for both main unit and rainfall remote.

Specifications:

• Rainfall measuring range:
  • Daily: 0 to 39.33 inches (0 to 999 millimeters)
  • Weekly: 0 to 393.66 inches (0 to 9999 millimeters)
  • Monthly: 0 to 393.66 inches (0 to 9999 millimeters)
  • Total: 0 to 393.66 inches (0 to 9999 millimeters)
• Rainfall resolution: 0.04 inches (1 millimeter)
• Rainfall accuracy: +/- 3%
• Rainfall sensor transmission range: 100 feet (30 meters) maximum in open space with no interference
• Rainfall data transmission rate: every 30 seconds during rainfall, and every 2-1/2 minutes otherwise
• Main unit power requirements: two AA (1.5V) alkaline batteries, with expected life of 1 year
• Rainfall sensor power requirements: two AA (1.5V) alkaline batteries, with expected life of 1 year
• Clock accuracy: +/- 30 seconds per month
• Expected battery life (main unit and rainfall remote): 1 year
• Main unit dimensions (with table stand not extended):
  5 inches (127.0 mm) wide
  3-3/8 inches (85.7 mm) high
  1-1/4 inches (31.8 mm) deep
• Remote rainfall sensor dimensions:
  4-1/2 inches (114.3 mm) wide, excluding mounting feet
  5 inches (127.0 mm) wide, including mounting feet
  5-3/4 inches (146.1 mm) high
  4-1/2 inches (114.3 mm) deep