#818 Taylor Weekend Warrior
Dual Event Big Digit Kitchen Timer with Illuminated Display

The #818 Taylor Weekend Warrior is a medium-size dual event digital timer and clock. The #818's large two-line display has hour and minutes digits almost 1/2 inch tall, seconds digits not much smaller, and an electro-luminescent backlight for viewing in low light conditions. The Taylor #818 can display hours, minutes and seconds for two independent timers that can count up to, or down from 23 hours 59 minutes 59 seconds. The second timer display may be switched to a clock display, and back again, while the second timer continues to run. 

Click to Enlarge

Features:

• Medium-size unit with two independent timers plus clock.
• Large, two-line display with big 7/16-inch hour and minutes digits and 5/16 inch seconds digits.
• Integral quartz clock can show time in second (Timer 2) line of display.
• Time format is user-selectable for 12-hour with AM or PM, or 24-hour.
• Time can be displayed temporarily without affecting timer operation.
• Timers can be used to time two separate events simultaneously. 
• Both timers independently count up to or down from a maximum of 23 hours 59 minutes 59 seconds in 1-second increments.
• When count reaches zero in countdown mode, a count-up starts automatically. When this occurs, you can pause the count-up, recall the last set time, and then reset that time to zero if desired.
• Water resistant (but not submersible or dishwasher-safe).
• Three-way mounting: clip, magnet, or stand.
• Battery is included and preinstalled.

Specifications:

• Power requirements: one AAA (1.5V) battery. We recommend an alkaline battery when replacement becomes necessary.
• Dimensions:
  3-3/8 inches wide
  3-1/2 inches high
  1-1/8 inches deep with holder not extended

While one or both timers are operating, you can switch to clock mode temporarily to view the time without affecting timer operation.

On the back of the #818 timer is a 3-way holder. When the holder is used as a spring clip, you can attach the timer to, for example, a waistband or apron. You can also flip out a metal bar to extend the clip, which lets you stand the timer at an angle on a flat surface. On the back of the clip itself is a magnet that can hold the timer to an iron or steel surface, such as a range hood or refrigerator door.

One Year Limited Warranty: "Taylor warrants this product to be free of defects in material or workmanship, and on return, will repair or replace it at our option, without charge."