[ GiftnGadget Home > Shop by Brand > Taylor Precision Instruments > Taylor Thermometers, Hygrometers, Thermo-hygrometers > Taylor Precision 2752 Wireless Weather Station ]
|
|
Taylor Precision 2752
Wireless Weather Station |
|
The Taylor Precision 2752 Wireless Weather Station,
with its built in anemometer, is one of the few weather instruments that can tell you what it really
feels like outside. At a glance, the Taylor Precision 2752 provides not only
outdoor Temperature and Humidity, but also Wind Chill, Wind Speed and
Direction. In addition, the 2752 provides indoor temperature, time, date and day of
the week.
|
|
|
|
|
The Taylor Precision 2752 is finished in
white with gold trim and stands 7 1/2 inches
tall. The display includes outdoor
temperature, humidity, wind chill, wind speed (gust
or average) and
direction, plus indoor temperature, time, date and day of the
week. Data is provided by the included remote thermometer,
hygrometer and anemometer sender. The 2752 has a flip
out stand that allows it to stand on a table, shelf or
nightstand, or it may be hung on a wall. The display has a soft
green backlight that lights the display for approximately 10
seconds when the backlight button is pressed.
Additional remotes may be
purchased to monitor temperature and humidity at up to two
additional locations.
|
|
|
Features:
- Read outdoor temperature and
humidity indoors
- Displays wind chill
- Measures wind speed (gust or
average)
- Measures wind direction
- Monitors indoor temperature
- Recall Min/Max readings for indoor
temperature, outdoor temperature, humidity, wind chill, and wind speed for the included remote
- Recall Min/Max readings for
outdoor temperature and humidity, and wind chill for optional, additional
remotes
|
- Quartz clock and calendar with
date and day of the week
- Display backlight illuminates for
approximately 10 seconds when the "backlight" button
is pressed
- Degrees F and C switchable
- Wind speed in m/s, km/h, mph,
knots or Beaufort
- Wireless remote
anemometer/thermometer/hygrometer sensor included
- Additional thermo-hygro sensors
are available
|
 |
Outdoor data is sensed by the
included remote sender
and transmitted to the Taylor 2752 display from up to 200
feet away (depending on obstructions*). The sender
may be mounted on a 1" to 1 1/4" diameter mast (not
included), such as a
TV antenna mast, or a piece of pipe stuck in the ground. |
|
The display of the Taylor 2752 has three
sections. The large top section displays outdoor conditions. At the
top is remote temperature, with degree digits a little over 1/2 inch high
(tenths are smaller). Below that is wind direction in one of 16
compass headings, and wind speed (in your choice of average or gust) in
3/8 inch digits (tenths are smaller). To the right is wind chill, in 3/8 inch digits (again, tenths are smaller).
Below that is humidity, in digits a bit over 1/2 inch. If you choose
to purchase additional thermo-hygro remotes, the remote temperature,
humidity, and wind chill fields can display the conditions at
any of the remote locations (up to three, including the included
anemometer/thermo-hygro). Optionally, the display can be set to
scroll through the remotes, displaying each for 10 seconds each. By
pressing the "memory" button, maximum and minimum readings for
all values, since the last manual reset, may be displayed.
The second section of the display shows
indoor temperature in 1/2 inch digits. Maximum and minimum reading
since the last reset are available by pressing the "memory"
button.
The lower portion of the display shows time
(in your choice of 12 or 24 hour format) with hours and minutes in 1/2
inch digits (seconds are smaller). To the right of the time is the
date and day of the week.
The bottom section of the display normally
displays indoor temperature (in degrees F or C) and humidity, in 1/2 inch
digits, or the temperature and humidity for your choice of remote
locations. The temperature display can also display dew point for the selected location. Also displayed are
temperature and humidity trend arrows, and comfort level. By pressing the
"memory" button, you may also display the maximum or minimum
values reached for temperature, humidity, or dew point for any
of the locations since the last time the memory was
cleared.
|
|
Specifications:
- Indoor temperature measuring range:
+32°F to +122°F (0°C to +50°C)
- Outdoor temperature measuring range:
-4°F to +140°F (-20°C to +60°C)
- Indoor humidity range:
20% - 99% RH
- Temperature resolution: 0.1°F/°C, 1%
humidity on
both main unit and remote
- Wind speed range:
0 - 30 m/sec, 0 - 108 km/hr, 0-67 mph, 0 - 58.3 knots, 0 - 11
Beaufort
- Maximum of 3 remote locations, wind
speed and direction only on channel 1
- Remote sensor transmission frequency:
434 MHz
- Remote sensor transmission range: 200
feet (60 meters) maximum in open space with no interference*
- Clock is quartz controlled
- Main unit power requirements: two AA
(1.5V) batteries, lithium recommended (not included)
- Remote sensor power requirements: two AA
(1.5V) batteries, lithium recommended (not included)
|
|
|
Note:
The distance from the remote to the display unit is rated at up to 200
feet with no obstructions. This range will be reduced by walls,
windows, trees and bushes that lie between the remote and the
display. In addition, interference from cordless phones and other
wireless devices may interfere with communications between the remote
and the display, and further reduce range.
|
|
|
If the order
button is there, but the shopping cart page indicates that there
are no units available, then we are temporarily out of stock.
The item should be available in a day or two. Our
inventory control system tries it's best to keep us from
allowing the sale of something we don't have on the shelf.
If there is no
order button, most likely there are bigger problems with
availability. We may be out of stock for more than a few
days.
For shipping time estimates, please see the Fedex web site at www.fedex.com.
Your package will be shipped from zip code 60544. Keep in mind, Fedex travel days do not include
weekends or holidays.
|
|
|
 |
