Weather Forecast Station with Indoor/Outdoor Thermometer, Ice Warning, Kinetic Forecast Icons, Temperature Min/Max Memory and High/Low Alarms, and Atomic Clock with Calendar, Moon Phase, and Snooze Alarm

Striking in gloss black, the BAR386A Oregon Scientific Wireless Weather Forecaster has a great variety of features. It displays the indoor temperature plus the outdoor (or other remote) temperature from 1 to 3 locations. It also provides highly accurate weather forecasts and shows the trends for barometric pressure and indoor and all remote temperatures.  The BAR386A's temperature memory records and retains minimum and maximum values (since the last reset) for instant pushbutton display. Audible high and low temperature alarms can be set for remote Channel 1, and a visible ice warning can be displayed for Channel 1 as well. Rounding out this station's many features is a radio-controlled ("atomic") clock with calendar, moon phase, and snooze alarm.

The upper section of the LCD panel is the weather area. In it, you see one of four forecast icons: Clear, Partly Cloudy, Cloudy, or Rainy (which predicts snow in cold weather). The forecast is based on barometric pressure changes. It's for 12 to 24 hours in the future and about 70% to 75% accurate. You also see a barometric pressure trend arrow (rising, steady, or falling) in the upper left corner of the weather area.

To the right of the forecast icon is displayed the outdoor (or other remote) temperature and, below it, the indoor temperature. Above indoor and outdoor degree tenths are displayed trend arrows (rising, steady, or falling) for indoor and outdoor temperatures. In the outdoor temperature display, a house icon with a number (1, 2, or 3) in it indicates the selected channel, and waves above the house indicate successful signal reception from that channel's remote. A house icon containing the word IN appears in the indoor temperature display.

If high and/or low temperature alarms are set for Channel 1, alarm bell Hi and Lo icons appear in the Channel 1 outdoor temperature display. If the Channel 1 remote temperature falls to between 37°F and 28°F (3°C and -2°C), an ice warning icon in the form of a snowflake or ice crystal below the Channel 1 (house) icon flashes on and off. You can option the display to auto-scan between active sensors, and you can press the MEM button to manually toggle between current, minimum, and maximum temperatures for a selected sensor. Displaying minimum and maximum values for a remote channel also causes minimum and maximum indoor values to be displayed as well.

The lower section of the LCD panel is the clock and alarm area. The time is shown as hour and minutes in 12-hour format with AM or PM. Month and date are shown digitally as MM/DD. The weekday is a two-letter abbreviation in your choice of English, French, German, Italian, or Spanish. The MODE button on the right side of the case lets you display clock seconds as an alternative to the weekday. If the clock has successfully received the WWVB 60 kHz time-synchronization radio signal from the U.S. atomic clock in Colorado, a tower and waves icon appears to the left of the time. Although you must select your continental U.S. time zone (Pacific, Mountain, Central, or Eastern), the zone is not displayed during normal operation. Also, the year is displayed only during manual setup. The current moon phase is displayed above the calendar information as one of eight icons. These are shown and described in the User Manual. You can view the moon phase for any day from year 2001 through 2099.

The BAR386A's atomic clock has a single daily crescendo alarm with 2-minute duration and an available 8-minute snooze function. The set alarm time can be viewed as an alternative to the normal time and calendar display.

One THN132N wireless remote temperature sensor is included with the BAR386A, and the station can actually monitor up to three temperature sensors at a distance of up to 100 feet (30 meters). The THN132N is a non-displaying sensor. Additional remote sensors can be obtained separately and include the following:

• THGR268. This is a temperature and humidity sensor with its own display. If you use this remote, you won't see the humidity on the BAR386A main unit.
• THGN123N. This is a non-displaying temperature and humidity sensor that, with lithium batteries installed, works down to -40°C/F.  If you use this remote, you won't see the humidity on the BAR386A main unit.
• THC268. This is a temperature-only sensor with its own display and a waterproof probe on a 10-foot (3-meter) cable for use in pools, spas, hot tubs, freezers, soil, etc.

The BAR386A main unit is designed for free-standing use only and has a non-skid "back foot." The THN132N remote sensor can rest on a horizontal surface, or it can be wall-mounted via a keyhole slot on the back. Please be aware that the small table stand that extends from the back of the remote is an integral part of the battery compartment cover that makes up most of back of the remote. You can hang the remote on a wall with the stand in place. This remote is water-resistant but not waterproof. Choose a mounting location where the THN132N is protected from direct sunlight and direct precipitation.

The main unit uses three AA alkaline batteries, and the remote temperature sensor uses one AA alkaline battery. All batteries must be obtained separately. If the remote will be used in sub-freezing temperature conditions, a lithium battery is recommended instead of alkaline. Low battery icons are displayed on the main unit for itself and all active remotes when replacement becomes necessary.

Note: This product comes in a clear plastic blister pack that, once cut open, cannot be resealed. Because opening a blister pack renders the enclosed product unfit for resale, non-defective products whose blister packs have been opened are not returnable. If you receive this product and it is not to your liking (for example, if its appearance does not meet your expectations), please leave the blister pack unopened and contact us for return instructions. Defective products, however, can be returned for replacement. Again, please contact us for instructions.

Features and Benefits:

• It's wireless! Easy setup with no cables to string--remote temperature sensors send data back to main unit (base station) via 433MHz radio waves.
• Know the temperature both indoors and at up to three remote locations--outdoors or in your greenhouse, baby's room, warehouse, wine cellar or other location--from the comfort of your home or office.
• At a glance, check the current barometric pressure trend, the indoor and outdoor temperature trends, and the weather forecast.
• Four weather forecast icons indicate Clear, Partly Cloudy, Cloudy, or Rainy (which predicts snow in cold weather).
• Weather forecast is for 12 to 24 hours in the future, covers an 18- to 30-mile (30- to 50-km) radius, and is about 70% to 75% accurate..
• Trend arrows indicate Rising, Steady, or Falling for barometric pressure and indoor and outdoor temperatures.
• Audible high and low temperature alerts and a visible ice warning can be set for remote Channel 1.
• User-selectable metric or English units: Choose °C or °F for temperature indications.
• Station comes complete with one THN132N temperature sensor--add one or two additional sensors (optional; not included) to monitor up to three remote locations, indoors or out.
• Integral memory stores maximum and minimum temperature readings (indoor and from remotes) for instant pushbutton display.
• Integral radio-controlled clock with calendar and alarm automatically synchronizes itself to the U.S. atomic clock in Colorado and also automatically adjusts for Daylight Saving Time.
• Clock can be manually set if desired.
• An RF (radio frequency) tower-and-wave icon indicates that the clock is receiving the synchronizing radio signals (WWVB, 60 kHz) for time and date.
• Clock displays time in 12-hour format with AM or PM.
• Month, date, and weekday are shown along with the time.
• Two-letter weekday abbreviation is user-selectable for any of five languages: English, French, German, Italian, or Spanish.
• Clock seconds can be displayed instead of weekday.
• Calendar display shows month-date in that order.
• One of eight moon phase icons is displayed above month and date.
• Current moon phase or moon phases from year 2001 to 2099 can be displayed.
• Continental U.S. time zone (Pacific, Mountain, Central, or Eastern) is shown as an abbreviation that is displayed only during setup.
• Daily 2-minute crescendo alarm has an 8-minute snooze function.
• Maximum transmission range for remote sensors is 100 feet (30 meters).
• Main unit provides low-battery indications for itself and all remotes in use.
• Main unit is free-standing only and is powered by three AA alkaline batteries.
• Remote can be free-standing or wall-mounted and is powered by one AA alkaline or lithium battery.

Specifications: