Are you looking for a totally accurate digital clock with calendar and indoor temperature displays? Check out the Atomix 75310 Hanover Atomic Clock. This radio controlled clock looks great either hanging on a wall or resting on a table or shelf. The hour and minute digits are a full 2 inches tall and quite bold, and seconds are 1 inch tall. The date, day of week, and indoor temperature (all displayed digitally) are 7/8 inch tall, and the month is slightly smaller.

Successful reception of the time-synchronization signal from Colorado is indicated by a radio tower and waves icon just above seconds in the upper section of the display. After synchronization occurs, you can select your continental U.S. time zone (EST, CST, MST, or PST) by means of a button on the back of the clock.

The indoor temperature can be displayed in either °F or °C, and both the temperature unit and the 12-/24-hour time mode can be changed at any time during normal operation simply by pressing buttons on the back of the clock. You don't have to reinitiate clock setup to do this.

The Atomix 75310 Hanover clock can be mounted on a wall, or you can extend the folding legs and place the clock on a table or shelf. Either way, this clock will look good while providing you with valuable time and temperature information.

Note: The 60kHz AM radio signal used by NIST to deliver the time information carries best at night. The signal may be interfered with by weather conditions and local interference. Building construction and location within the building can also affect reception. This clock is quartz controlled and will keep very good time for days when reception is poor, so this isn't normally a problem. You may find, however, that when you first insert the batteries, or during a Daylight Saving Time change, the clock will not be able to set itself immediately if reception is poor. Signal strength is indicated by the icon above seconds in the time display. You may wish to check the icon when selecting a location for your clock. Because wiring and plumbing in your walls can affect reception, moving the clock as little as a couple of inches can make a difference in the strength of the signal reaching the clock. For additional information, please see the Chaney Instrument Clock FAQ.

Features:

• 
  
  Clock receives 60 kHz WWVB time-synchronization radio signal from U.S. atomic clock operated by NIST in Colorado.
• Automatic time and date adjustment after signal reception.
• 
  
  Manual clock setting is also possible.
• Daylight Saving Time (DST) on/off option.
• Radio tower and waves icon indicates successful signal reception.
• 
  
  Time is displayed as hour, minutes, and seconds.
• 
  
  Month, date, and weekday are displayed digitally below the time.
• 
  
  Time format is user-selectable for 12-hour or 24-hour.
• 
  
  Indoor temperature is displayed to the right of the weekday.
• 
  
  Temperature unit is selectable for °F or °C.
• 
  
  Clock is powered by two AA (1.5V) alkaline batteries (not included).
• 
  
  Clock can be wall-mounted or free-standing.

Specifications:

• Indoor temperature measuring range: 32°F to 158°F (0°C to 50°C)
• Temperature resolution: 0.1°F/C
• Dimensions:
  • 9-1/2 inches (241 mm) wide
  • 10-1/2 inches (267 mm) high
  • 1-1/4 inches (32 mm) deep with legs folded in